995*5800mm Serrated Bar Grating For Structure Platform From Anping China

Welcome to Anping Tiantai Metal Product Co, . Ltd., where we manufacture strong, safe, no-maintenance steel grating and accessories for a wide range of industrial uses.

We can manufacture serrated Bar grating to any length and width to meet your specifications.

Serrated Bar Grating Common specification
1)Bearing bar pitches may be 15 to 30, 40, 60, 80 and 90mm,Of which 30and 40mm are recommended
2)Cross bar pitch may be 30, 38, 50, 76 and 100mm,Of which 50 and 100mm are recommended

Serrated Bar Grating Finished
1. Hot-DIP galvanizing. It is the process of coating iron or steel with a thin zinc layer by passing the steel through a molten bath of zinc at a temperature of around 860 F (460 C). When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide, which further reacts with carbonate, adult grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements. Galvanized steel is widely used in applications where rust resistance is needed.
2. Painting
3. Untreated.

Process of serrated bar grating
We have our own factory and facility.
Excellent hot-dip galvanizing process to achieve great anti-acid and alkali corrosion.
We can manufacturer any kinds of specification as your demand.

Packing and loading of serrated bar grating
Normally packed in pilling up ways with two pieces of square wood on both upperand bottom sides.
there are four or six pieces of M10 long bolt penetrading the gratings and screwing together.
It is suitable for loading and unloading by fork-lift and crane.