Stainless steel grating clips
Despriction
The steel grating installation clip is made of high-quality steel
plate through machine bending and punching. The installation clip
is durable and easy to install. The galvanized installation clip is
beautiful and firm, and it is not easy to rust, and it can fix the
steel grid well. board.
Steel grating clips style:
A, B and C style
Type A: It consists of an upper plate with double hooks, a lower
plate with teeth and an M8 hexagon socket bolt.
Type B: It consists of an upper pressure plate with double hooks
(one hook can enclose two adjacent steel gratings), a toothed lower
pressure plate and a >M8 inner corner bolt.
Type C: It consists of an upper pressure plate with double hooks
and an M8 hexagon head bolt that can be welded to the supporting
member.
Installation method
A style clip is removable, easy to install, is the mostely used,
including top clamp, bottom clapm and screw and nut.
B style clip also is removable, easy to install, is the mostely
used, including top clamp, bottom clapm and screw and nut.
C style clip usually is welding installation, nut is usually welded
on bottom steel beam, un-removable,including top clamp, bottom
clapm and screw and nut, which is the most ecnomy style.
Kindly note
The steel grating that needs to be movable and detachable must be
fixed with a special installation fixture for the steel grating to
prevent any displacement of the member.
The mounting clip can be supplied by the manufacturer according to
the requirement of the buyer. Except for the mounting clip made of
stainless steel, the mounting clip made of carbon steel must be
surface treated with hot-dip galvanizing. It is recommended that
the bolts used for the mounting clip be treated with hot-dip
galvanized surface. Less than 8mm, the number of mounting clips
used for each steel grating shall not be less than 4. It is best to
install a few more plates on the available supports for larger
spans.
In order to find out any corrosion or any dangerous loosening or
changes in the position of the clamping parts, the fastening status
of the accessories should be checked at any time.
Suitable for below steel grating specification
| bearing bar | 25/3mm , 25mm/4mm , 25mm/5mm , 30/3mm , 30/5mm,32/3mm,32/5mm
,40/3mm............ 75/5mm,100/10mm |
| opening | 30mm x 32mm , 30mm x 60mm, 30mm x 100mm , 38mm x 100mm , 40mm x
100mm , 50mm x 50mm ,50mm x 100mm etc |
| surface treatment | black , hot dip galvanized |
| type | plain bar, serrated bar , I shape bar |
Steel Grating Clip Pictures
